Paneldue , erase firmware from software

[KipK]

Hi.

I'd like to ease up my paneldue upgrade process. It's mounted in such a way that accessing the usb ports and buttons need a pain disassembly of my printer front panel.

I have an extension connector of the paneldue serial port, I'd like to flash the paneldue from uart instead of usb
However, I still need to push the erase button that is not accessible.

Is there not a software way of erasing the firmware from a serial command?

[A Former User]

Afaik no, M999 P"ERASE" is just for the Duet; but update from RRF is/was on the roadmap according to something I read eons ago.

[wilriker]

@KipK said in Paneldue , erase firmware from software:

Is there not a software way of erasing the firmware from a serial command?

I will include such a button in version 3.3.

[dc42]

In theory it's possible to do the complete programming of PanelDue v3 from the Duet, but we haven't yet found time to write the code to run in the Duet.

[KipK]

@wilriker thanks for this, will get the panel unmounting thing of the past