Duet3 , panelDUE and panelDue inboard sdCard
-
Hello,
I have a duet3 and a panelDue. I know that the panelDUE inboard sd card reader is not supported. However I have read that you can connect an external sd reader connected to the duet3 board.
Could you guide me throw the connection and configuration process?
Thanks for your time
-
@diego said in Duet3 , panelDUE and panelDue inboard sdCard:
. However I have read that you can connect an external sd reader connected to the duet3 board.
where did you read that?
because the duet 3 does not have firmware support for that.
-
Hello,
If you check this post https://forum.duet3d.com/topic/14906/any-timeline-on-having-sd-card-functionality-on-panel-due-duet-3
You could read :
For those running Duet 3 in standalone mode, it would be possible to support either the PanelDue SD card or a standalone SD card socket connected to the daughter board connector of the Duet 3. However, we envisage that most users wanting to use removable storage on Duet 3 (an unusual thing to do IMO when you have a web interface) will choose to use a USB stick plugged into the RPi; because USB sticks are nicer to handle, and unlike SD cards they are designed to handle many repeated removals and insertions.
I don't know if this means that this is possible and not implemented or already implemented but without sd connection.
Thanks
-
its not implemented and likely very low on the list of features to be implemented.
-
Thanks for your answer
-
@diego we expect to support this ins RRF 3.4.0rc1.
-
This is fixed in 3.4.0beta7+2, see https://forum.duet3d.com/topic/26787/unofficial-rrf-3-4-0beta7-2-files.
