duet 2 wifi is really loud
lynnch21 last edited by
i do not know how to turn stealth chop on this is firmware from e3d for their e3d tool changer printer i know the e0,e1,e2 and e3d stepper current is set at 1650 ma on moon steppers
jay_s_uk last edited by
Zhang Jianyu last edited by Zhang Jianyu
The Duet 2 WiFi does not support stealthchop because it uses TMC2660 drivers which don't provide said feature. That being said, there are tuning methods to reduce the sound level: https://duet3d.dozuki.com/Wiki/Reducing_Stand-Still_Noise
Not sure if these apply when running (rather than at standstill) but it might be worth a shot.