M906 mA steps for toolboard

[matt3o]

I understand that duet3 can set amperage with 26.2mA steps, is it the same for the toolboard? I can't seem to find this info. Thanks

[Phaedrux]

The tool board uses the 2209 same as the mini5+. Looking at the data sheet I wasn't able to find anything specific. Lemme check and get back to you.

[dc42]

It's 50mA.

[matt3o]

@dc42 thanks! worth adding that to the wiki!

[Phaedrux]

@matt3o It's already there!! Like magic.

https://duet3d.dozuki.com/Wiki/Gcode?revisionid=HEAD#Section_M906_Set_motor_currents