DWC not accesible from one of my computers?
Weird problem I just ran into, I was working from my laptop connected to my new duet3 while setting up endstops. I was having more problems getting them to trigger correctly and get the LED to trigger when I wanted them to when I thought I bricked my board after adding a "!" to invert one of my signal pins.
I removed this from the code in the M574 line and as was well, but weirdly i could no longer access DWC from my laptop. I can through the PI, my desktop, and phone, but not my laptop (all on chrome).
I tried resetting my wifi network, restarting the laptop, double checking the address. no good so far. I can even connect to my duet2 board from all these devices.
Any ideas on this?
clear your cache on the laptop? Definitely seems like a laptop problem.
I tried a 24hr nuke on chrome from that system and it didn't seem to help. I'll try working with it more this afternoon. I remoted into my desktop from my laptop, which works, but is a bit silly.
Could you open the inspect tab in chrome and go to the console to see if there are any errors noted?
Right click, inspect.
I came back tonight to mess with it and it is now working through this laptop's browser. I'm not sure what fixed it, but it's working now. Possibly was a cache thing?
Possibly was a cache thing?
Sounds plausible to me. Glad it's working out now.