On my Ender 3, I've changed hotend, and now the print area is a bit off from the bed area.
Can I define an offset to the bed?
A Former User last edited by
if you changed the tool, a tool offset makes more sense imho.
i believe is what you're after
jay_s_uk last edited by
or modify your minima in M208.
if when you home your nozzle is 10mm off the bed, set your M208 X-10 S1 rather than X0.
When you home then, that location is -10
M563 P0 D0 H1 F0 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C
So I just change this G10 like this to move the Y axis?
G10 P0 X0 Y20 Z0
I would say that the M208 option is a better way unless you're actively switching tool heads on a regular basis.
Thank you, I used the M208 option like this:
M208 X0 Y-12 Z0 S1 ; set axis minima
M208 X235 Y235 Z250 S0 ; set axis maxima