Duetxxx 3D mockups

[fma]

Hi!

Are there some 3D mockups of the Duetxxx boards (wifi/ethernet, x2/x5) available?

I should receive my DuetWifi + Duex5 very soon, and plan to install them between 2 PMMA sheets distant from 45mm (Bosh profile). These sheets will be laser cut, and I will add fans to cool down TMC chips.

Thanks.

[lars]

https://grabcad.com/library/duet-wifi-1

https://grabcad.com/library/duex5-1

[dc42]

Btw, the TMC chips normally only need cooling if you run them above 2A motor current.

[fma]

Great, thank!