RRF3.2beta4 and DWC 3.2.0 beta4 heatbed now missing ...
-
Did an Upgrade to RRF3.2beta4 / DWC 3.2.0-beta4 / Duet WiFi Server 1.25beta0 - heatbed now missing ...
Any ideas ?
;---------------------------
; Heaters
;---------------------------
H-1
; *** Bed H0
M308 S0 P"bedtemp" Y"thermistor" T100000 B3988 C0 R4700 ; Set thermistor + ADC parameters for heater 0
M950 H0 C"bedheat" T0
M143 H0 S120 ; Set temperature limit for heater 0 to 110C; *** Extruder / HotEnd H1
M308 S1 P"e0temp" Y"thermistor" T100000 B4725 C7.060000e-8 R4700 ; Set thermistor + ADC parameters for heater 1
M950 H1 C"e0heat" T1
M143 H1 S275 ; Set temperature limit for heater 1 to 275C -
add M140 H0 before the M143 command
-
@jay_s_uk said in RRF3.2beta4 / DWC 3.2.0-beta4 - heatbed now missing ...:
M140 H0
That did it ... Thank You ! Much appreciated
Now I shall go look to see why that was needed where it wasnt before ...
