SOLVED Crimp pins for stepper on Duet3 6HC mainboard
medicusdkfz last edited by medicusdkfz
I am running out of crimp pins for converting my Voron 2.4 with a Duet3 6HC from 1.8° steppers to 0.9°. Where can I get them in Germany? Does anyone have a link?
It would be great if there would be replacement bags from the manufacturer at the dealers. In the case of a conversion, one has this problem in any case...
@medicusdkfz See here for a list of Duet 3 connectors: https://duet3d.dozuki.com/Wiki/Connector_and_spare_part_numbers#Section_Duet_Num_3
I think you want the VH396T-L crimps. These should be widely available, though not sure exactly where in Germany! The '-L' is for 'loose', so delete that to search for them on the reel, if that's what you need.
Veti last edited by
not sure but they are listed as jst vh
medicusdkfz last edited by
I've found them already. It's the same link...