Problems with ethernet connection
alr last edited by
I can't connect my Duet 2 Ethernet with my network anymore.
Firmware 3.2 is installed via USB and YAT is working.
Problem: non of the LED's (yellow & green) in the connector is on. The cable and the router settings haven't been changed....
Is there any chance that the fault is on my side and not a hardware issue ? How can I test this ?
Thanks for your help
pipersw last edited by
Same issue here, I follow the post.
jay_s_uk last edited by
can you post your config.h, an out put from M122 and an output from M115