Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    IMPORTANT ISSUE with bed temp controller

    Scheduled Pinned Locked Moved Solved
    Firmware developers
    fire risk
    8
    86
    4.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jrocklandundefined
      jrockland @Veti
      last edited by

      @Veti O don't worry for me, theses machines are intended to crash so they have fire extinguishing system in place. and I don't run them in my house.

      ever seen an axis with over 60lbs of torque crash ? parts goes flying XD

      1 Reply Last reply Reply Quote 0
      • jrocklandundefined
        jrockland @Luke'sLaboratory
        last edited by

        @Luke-sLaboratory That would explain why it was working before the update, bang bang was probably activated before...

        I will try to find how to write it properly using bang bang.

        1 Reply Last reply Reply Quote 0
        • fcwiltundefined
          fcwilt @jrockland
          last edited by fcwilt

          This post is deleted!
          1 Reply Last reply Reply Quote 0
          • jrocklandundefined
            jrockland @Luke'sLaboratory
            last edited by

            @Luke-sLaboratory hmm wait if I look at my config file bang bang IS activated..

            fcwiltundefined 1 Reply Last reply Reply Quote 0
            • jrocklandundefined
              jrockland
              last edited by

              @fcwilt you where right (before deleting your comment) but my config was set as using bang bang..

              fcwiltundefined 1 Reply Last reply Reply Quote 0
              • fcwiltundefined
                fcwilt @jrockland
                last edited by

                @jrockland said in IMPORTANT ISSUE with bed temp controller:

                @Luke-sLaboratory hmm wait if I look at my config file bang bang IS activated..

                Even with the slow rate of "bang bank" a mechanical relay is not a good choice.

                Frederick

                jrocklandundefined 1 Reply Last reply Reply Quote 0
                • fcwiltundefined
                  fcwilt @jrockland
                  last edited by

                  @jrockland said in IMPORTANT ISSUE with bed temp controller:

                  @fcwilt you where right (before deleting your comment) but my config was set as using bang bang..

                  I saw that someone had already mentioned that issue so I tried to delete mine.

                  Frederick

                  1 Reply Last reply Reply Quote 0
                  • jrocklandundefined
                    jrockland @fcwilt
                    last edited by

                    @fcwilt true, probably why they where changed on the other machines

                    1 Reply Last reply Reply Quote 0
                    • jrocklandundefined
                      jrockland
                      last edited by

                      Good news tho, the 3/4 inch aluminum bed survived (still straight). the only thing that died is the embedded magnets (n52).. Ill get those replaced then work on the gcode once the board is back.

                      1 Reply Last reply Reply Quote 0
                      • jrocklandundefined
                        jrockland
                        last edited by

                        reprap is getting better and better, and those 6hg/3hc boards are really solid. we blown multiple motors and heaters core (I remember something crashed IN the board hard enough that the thin metal door bended and shorted the board) and it still running strong.

                        I tried to delete the post as it look like bang bang was deactivated, so not a firmware issue. anyway probably my bad when I wrote the gcode.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA