Printing issues
-
Hi All,
I hope everyone is well,
Im hoping someone can help me with this. I seem to be having some issues with my printing and i have no idea why it keeps doing this.
So when i begin a print it starts well and i like to keep an eye on it for the first few layers. i then leave it for an hour to and hour and a half and i get this
https://youtu.be/LjgYvJZHnegive got a bl touch but i have also played with the leveling which seems pretty good
Anyone got any ideas? i really want to begin printing a new fan duct but this keeps happening.
Thank you
J
-
glass does not have the best adhesion.
have you tried applying something like 3dgloop?
-
So i have a glue stick (very similar to pritstick) is that what you mean?
If so i will give it a go and feedback
-
yes pritstick will work somewhat as well
-
Hairspray is another option
-
@Blacksheep99 ohhh i like this idea
-
most current hairsprays are non stick. even the cheap stuff.
-
@Veti said in Printing issues:
most current hairsprays are non stick. even the cheap stuff.
My misses must have some old stuff then 😂
-
this is what i use on my ender 3
https://princore.de/collections/dauerdruckplatten/products/prinplate-pro-dauerdruckplatte-2mm?variant=32888263737443
