Problem with tool definition and extruder control
-
I changed M584 but nothing happens. Extrusion Control cannot be selected. not even after M302 P1cold extrude
-
This post is deleted! -
@Kirolefu I can't see anything else wrong with your config.
I've compared it against my one.
Did you reboot when you made the change? -
Yes after changing I reboot the System. When I changed M563 M563 P0 D0 H1 F0 to M563 P0 D1 H1 F0, the tool is no longer visible in the dashboard.
-
@Kirolefu don't change that line as D0 is still valid
-
I changed it again but I can't select anything in the extrusion control.
-
can you try heating up the hotend?
-
Yes Pid tuning and heating up works
-
@Kirolefu You need to select a tool before you can extrude with it. Try sending T0 first, or better still, add T0 to the end of your configuration file (that's Tzero). Let us know if that helps...........
-
Yes it works
I didn't know that you had to select the tool before. Thank you for the quick help. You saved my day. -
@Kirolefu said in Problem with tool definition and extruder control:
Yes it works
I didn't know that you had to select the tool before. Thank you for the quick help. You saved my day.Glad it worked.
