Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Upgrading Firmware.

    Scheduled Pinned Locked Moved
    Firmware installation
    7
    24
    885
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mendeleviumundefined
      mendelevium
      last edited by

      One other thing I notice is that on the dashboard- Job status says NO EXTRUDERS 😞

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by Phaedrux

        Screen shot of what you're seeing?

        Can you also send M122 and M98 P"config.g" in the console and copy and paste the results here?

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • mendeleviumundefined
          mendelevium
          last edited by

          managed to run the extruders now. Apparently, I edited the config as per suggestion on a forum.. don not know if it was this or any other honestly since I had found it days ago and screen shot it out, But the extruders are running nicely by command..
          a40c2344-9b2d-423f-ba36-8c40097a703c-image.png

          1 Reply Last reply Reply Quote 1
          • mendeleviumundefined
            mendelevium
            last edited by

            many thanks all who put an imput. Its appreciated a lot. Have a nice weekend.

            1 Reply Last reply Reply Quote 1
            • First post
              Last post
            Unless otherwise noted, all forum content is licensed under CC-BY-SA