E3D Toolchanger with Duet 3 Hardware Setup
-
I did a quick search and didn't see anything, but has anyone switched over their E3D Toolchanger from a Duet 2 to Duet 3 with tool boards? I wanted to see how straightforward it was and if there were any issues getting back up and running. I don't have my toolchanger wired yet, so this would be a fresh build for me.
I saw a youtube video where Duet3D was highlighting the tool boards using the E3D toolchanger, so I'm assuming / hoping there is a reasonable amount of information that already exists.
I'm new to Duet and I only have a limited amount of experience building 3D printers.
Thanks in advance!
-
@mmwellner dc42 has written a few posts about it
https://miscsolutions.wordpress.com/2020/03/02/converting-the-e3d-tool-changer-to-duet-3-with-hemera-tools-part-1/
and heres his config
https://github.com/Duet3D/RRF-machine-config-files/tree/master/E3D_Tool_Changer/dc42-duet3-centreZero-2Titan-2Hemera -
@jay_s_uk thanks a bunch. I should have googled more before posting!
