topic_solved No Duet IP address
I've lost connectivity with DWC after reverting from 3.2.2 back to 2.05: can't get IP address with M587 command in Serial Tool. Where did I go Wrong? Wifi module (blue) LED lit. TNC400 2.4Ghz Network.
PaulHew last edited by
Out of interest, why the backwards move in firmware?
I would use BOSSA to load the latest v3 RC to see if you can get back to where you were.
Do you still have access to USB terminal? If so, send M552 and see what it reports. It's possible the wifi server firmware didn't flash successfully, in which case you could send M997 S1 to re-flash.
Hey Paul, thanks for responding. The move backwards was a start from the beginning attempt. Could've made a better decision!!! First of all, I'm currently using a Mac Book Pro (not very familiar) and I'm not very computer savvy. Couldn't get BOSSA to work with Big Sur (Mac); gonna try Windows. Do I simply copy/paste v3 RC into browser
It would be easier if you could get the wifi module working again and connect to the duet web control in your browser. From there a firmware update is easier.
If that's not possible, using USB and bossa to flash is an option, or you can place the firmware file on the SD card and use a USB terminal software to send commands to the Duet to start the flash that way.
More details here: https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware
There are many options, come back with any questions.
Hey Phaedrux, re-flash worked; got an IP address/DWC. I'm learning. Til next time,