• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Cannot Connect to Duet 3 Web Control

Scheduled Pinned Locked Moved
Duet Web Control
4
69
3.6k
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    Frank 0 @Phaedrux
    last edited by 15 Jul 2021, 16:09

    @phaedrux Made a new SD card and have this on it. 6650af5e-3a6a-4fce-9761-c51ba26c943e-image.png.
    Is this all I need?

    undefined 1 Reply Last reply 15 Jul 2021, 18:39 Reply Quote 0
    • undefined
      Phaedrux Moderator @Frank 0
      last edited by 15 Jul 2021, 18:38

      @frank-0 said in Cannot Connect to Duet 3 Web Control:

      @phaedrux Is the latest stable release not 3.3? What happens if the SD card has 3.3 and the board has 3.4?

      The SD card doesn't really hold firmware in any meaningful way other than it has the bin files available to be flashed to the board itself. We can go back to 3.3 once you have solid access to dwc again.

      Z-Bot CoreXY Build | Thingiverse Profile

      1 Reply Last reply Reply Quote 0
      • undefined
        Phaedrux Moderator @Frank 0
        last edited by Phaedrux 15 Jul 2021, 18:39

        @frank-0 said in Cannot Connect to Duet 3 Web Control:

        @phaedrux Made a new SD card and have this on it. 6650af5e-3a6a-4fce-9761-c51ba26c943e-image.png.
        Is this all I need?

        No I listed the needed folders above. In addition to those you'll actually need a firmware folder as well.

        Technically those are the bare minimum. But we should create the rest so it doesn't complain.

        Z-Bot CoreXY Build | Thingiverse Profile

        undefined 1 Reply Last reply 15 Jul 2021, 18:41 Reply Quote 0
        • undefined
          Frank 0 @Phaedrux
          last edited by 15 Jul 2021, 18:41

          @phaedrux Could you point me back to where you listed the folders I need? I don't see it, I must be blind. I download the 3.3 firmware and then just put it in the www folder?

          1 Reply Last reply Reply Quote 0
          • undefined
            Phaedrux Moderator @Phaedrux
            last edited by 15 Jul 2021, 18:45

            @phaedrux said in Cannot Connect to Duet 3 Web Control:

            @frank-0 said in Cannot Connect to Duet 3 Web Control:

            @kb58 After using Bossa to reset my firmware, I cannot find the config.g file. The sys folder changed to this

            708e9f72-7a89-4a6d-9335-637dfe72a9c8-image.png

            I have never seen anything like that before.

            I suggest you get a clean new SD card, format it as FAT32, and then start fresh from there.

            Create the following folders

            sys
            macros
            www
            gcodes
            menu
            filaments

            Create a fresh config file set from here: https://configtool.reprapfirmware.org/Start

            Fill out the info to the best of your knowledge. We just want a starting point.

            What firmware bin file version did you use to flash with Bossa? 3.3?

            https://github.com/Duet3D/RepRapFirmware/releases/download/3.3/DuetWebControl-SD.zip

            Download that zip file and extract it into the /www/ folder.

            That should get your SD card back to a working state.

            Here it is.

            Z-Bot CoreXY Build | Thingiverse Profile

            undefined 1 Reply Last reply 15 Jul 2021, 18:48 Reply Quote 0
            • undefined
              Frank 0 @Phaedrux
              last edited by 15 Jul 2021, 18:48

              @phaedrux What should be in the macros/gcodes/menu/filaments folder? I can make the folders, but Im not sure what to put in them.

              undefined 1 Reply Last reply 15 Jul 2021, 19:48 Reply Quote 0
              • undefined
                Phaedrux Moderator @Frank 0
                last edited by Phaedrux 15 Jul 2021, 19:48

                @frank-0 Nothing. They will be empty.

                The gcodes folder is where your uploaded print files will go. menu is a folder for menu files when using a rotary encoder display. And filaments is used to store filament profiles if you set them up. They just need to exist otherwise you'll get a little warning that they are mising.

                Oh, and the firmware folder is where firmware files will go in future

                Z-Bot CoreXY Build | Thingiverse Profile

                undefined 1 Reply Last reply 15 Jul 2021, 19:50 Reply Quote 0
                • undefined
                  Frank 0 @Phaedrux
                  last edited by 15 Jul 2021, 19:50

                  @phaedrux I got this set up and have this currently: 16bb2979-4ab8-4688-bfd0-2f83e5f37e1c-image.png

                  This is my config.g file: 4726b94c-87c1-472e-8765-bf8dc868e255-image.png

                  and I extracted 3.3 firmware into www folder. YAT still doesn't really work. M552 S1 P192.168.2.2 just responds with ok, not network running.

                  undefined undefined 2 Replies Last reply 15 Jul 2021, 19:52 Reply Quote 0
                  • undefined
                    Frank 0 @Frank 0
                    last edited by 15 Jul 2021, 19:52

                    @frank-0 There is also no lights lit up at bottom of the ethernet port

                    1 Reply Last reply Reply Quote 0
                    • undefined
                      Phaedrux Moderator @Frank 0
                      last edited by 15 Jul 2021, 19:54

                      @frank-0 said in Cannot Connect to Duet 3 Web Control:

                      and I extracted 3.3 firmware into www folder.

                      Don't do that.

                      @frank-0 said in Cannot Connect to Duet 3 Web Control:

                      M552 S1 P192.168.2.2 just responds with ok,

                      If you send M552 what does it say?

                      @frank-0 said in Cannot Connect to Duet 3 Web Control:

                      I got this set up and have this currently:

                      Don't forget to add a folder called firmware.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      undefined 1 Reply Last reply 15 Jul 2021, 19:55 Reply Quote 0
                      • undefined
                        Frank 0 @Phaedrux
                        last edited by Frank 0 15 Jul 2021, 19:55

                        @phaedrux www folder :4e98ea59-2b9e-4bcb-89fe-80c4465832aa-image.png

                        YAT literally just says "ok", like in the images above from a while ago.

                        Should I just make an empty folder called "firmware"?

                        1 Reply Last reply Reply Quote 0
                        • undefined
                          Phaedrux Moderator
                          last edited by Phaedrux 15 Jul 2021, 19:56

                          Are you able to ping 192.168.2.2?

                          What IP is your computer using?

                          Have you tried a different cable?

                          Do the lights on the ethernet port light up if you connect to your router instead? even briefly?

                          Z-Bot CoreXY Build | Thingiverse Profile

                          undefined 2 Replies Last reply 15 Jul 2021, 19:57 Reply Quote 0
                          • undefined
                            Frank 0 @Phaedrux
                            last edited by 15 Jul 2021, 19:57

                            @phaedrux Timed out, is unreachable. Can't ping it

                            1 Reply Last reply Reply Quote 0
                            • undefined
                              Phaedrux Moderator
                              last edited by 15 Jul 2021, 20:00

                              What IP is your computer using?

                              Have you tried a different cable?

                              Do the lights on the ethernet port light up if you connect to your router instead? even briefly?

                              Z-Bot CoreXY Build | Thingiverse Profile

                              1 Reply Last reply Reply Quote 0
                              • undefined
                                Frank 0 @Phaedrux
                                last edited by 15 Jul 2021, 20:00

                                @phaedrux Computer is using an assigned IP address I changed in the control panel. It is 192.168.2.1. I tried different cable and no the lights don't light up at all.

                                undefined 1 Reply Last reply 15 Jul 2021, 20:02 Reply Quote 0
                                • undefined
                                  Phaedrux Moderator @Frank 0
                                  last edited by 15 Jul 2021, 20:02

                                  @frank-0 said in Cannot Connect to Duet 3 Web Control:

                                  I tried different cable and no the lights don't light up at all.

                                  Not with the router either?

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  undefined 1 Reply Last reply 15 Jul 2021, 20:03 Reply Quote 0
                                  • undefined
                                    Frank 0 @Phaedrux
                                    last edited by 15 Jul 2021, 20:03

                                    @phaedrux Yeah doesn't light up with either computer or router

                                    1 Reply Last reply Reply Quote 0
                                    • undefined
                                      Phaedrux Moderator
                                      last edited by 15 Jul 2021, 20:06

                                      Alright, I think we've solved the firmware problem since it's able to speak with YAT now and it is taking and executing commands.

                                      I think we have the SD card issue solved.

                                      Can you post your current config.g from the /sys/ folder please?

                                      Z-Bot CoreXY Build | Thingiverse Profile

                                      undefined 1 Reply Last reply 15 Jul 2021, 20:07 Reply Quote 0
                                      • undefined
                                        Frank 0 @Phaedrux
                                        last edited by 15 Jul 2021, 20:07

                                        @phaedrux81d203ad-5107-4606-8185-eec35b821793-image.png

                                        1 Reply Last reply Reply Quote 0
                                        • undefined
                                          Phaedrux Moderator
                                          last edited by 15 Jul 2021, 20:09

                                          Copy and paste the text please.

                                          Z-Bot CoreXY Build | Thingiverse Profile

                                          undefined 1 Reply Last reply 15 Jul 2021, 20:10 Reply Quote 0
                                          53 out of 69
                                          • First post
                                            53/69
                                            Last post
                                          Unless otherwise noted, all forum content is licensed under CC-BY-SA