Adding additional points to bed mesh?
-
I have few beds that have some minor dents on them which isn't a problem for the items I am printing but it is a problem for the printing itself. I'm currently running a 6x6 MBL. Is it possible to add additional points to the CSV but only in the problem areas? I'd like to avoid doing a MBL of 10x10 or more.
-
@leckietech think it needs to be a complete grid to work... however, you can just edit it in Excel. That way you can manually measure the points of interest, then just linearly interpolate the others and get a much more detailed map in half the time
I've done this before to edit out a couple of dodgy probe points from my meshHome-built CoreXY, Duet Wifi, Chimera direct drive, 2x BMG, 300x300x300 build volume
i3 clone with a bunch of mods -
@engikeneer said in Adding additional points to bed mesh?:
@leckietech think it needs to be a complete grid to work... however, you can just edit it in Excel. That way you can manually measure the points of interest, then just linearly interpolate the others and get a much more detailed map in half the time
I've done this before to edit out a couple of dodgy probe points from my meshWhat could possibly go wrong - those points didn't count anyway.
Frederick
-
@engikeneer said in Adding additional points to bed mesh?:
@leckietech think it needs to be a complete grid to work... however, you can just edit it in Excel. That way you can manually measure the points of interest, then just linearly interpolate the others and get a much more detailed map in half the time
I've done this before to edit out a couple of dodgy probe points from my meshyes, I am aware! I have a batch of bed spring steel bed plates that has some random bumps id like to target in addition to the grid. I don't think it is possible, however. I can only add more points which makes it very cumbersome for machines that don't have a probe.
