Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Set Mesh Parameters

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    3
    3
    110
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Btjundefined
      Btj
      last edited by

      Hm! You can excuse all my questions!
      has now made the card work except Set Mesh Parameters..no matter what I do I do not get to Mesh Parameters
      It only measures part of the bed

      fcwiltundefined Phaedruxundefined 2 Replies Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @Btj
        last edited by

        @btj said in Set Mesh Parameters:

        Hm! You can excuse all my questions!
        has now made the card work except Set Mesh Parameters..no matter what I do I do not get to Mesh Parameters
        It only measures part of the bed

        You should get in the habit of giving us a lot more information than that.

        At a minimum include the relevant commands and their parameters.

        Better still post, using the </> tag, all the relevant files, like config.g, mesh.g, etc.

        Frederick

        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator @Btj
          last edited by

          @btj said in Set Mesh Parameters:

          It only measures part of the bed

          Keep in mind that it can only measure the parts of the bed that the probe itself can actually reach.

          Z-Bot CoreXY Build | Thingiverse Profile

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA