Cant Connect Maestro
-
@erickindi still worth upgrading.
If you can use YAT, use fallback procedure 1 to upgrade, taking note that you should go to 2.05.1, then 3.0 and then 3.3 -
@jay_s_uk
It is reporting that the "iap4s.bin" is not found, I tried renaming the "DuetMaestroIAP.bin" file to "iap4s.bin" but it still reports the same old firmware with the M115 commmand.. Is this the correct procedure? Thanks -
@erickindi no. which firmware are you trying to upgrade from/to?
still at 2.01beta1? -
@jay_s_uk From 2.01beta1(RTOS) to 3.0
-
@erickindi i believe its this one https://github.com/Duet3D/RepRapFirmware/releases/download/3.0/DuetMaestroIAP.bin
-
@jay_s_uk do I have to rename to "iap4s.bin" in the sys folder? I tried both ways, and it does not update..
Why it is important to update to 3.0 now?
Thanks again -
@erickindi sorry, i gave you the wrong one
go for this one https://github.com/Duet3D/RepRapFirmware/releases/download/2.0/iap4s.bin
there have been lots of updates to improve the ethernet so its worth making sure you are running up to date firmware first -
@jay_s_uk Thankyou so much! Now it is updated to the 3.3 firmware! (3.0 and then to 3.3).
But I get the same error connecting to the web control..The command line I use:
SENDING:M552 S1 P192.168.1.158
Network running, IP address = 192.168.1.158
M552
SENDING:M552
Network is enabled, configured IP address: 192.168.1.158, actual IP address: 192.168.1.158But there is nothing in the 192.168.1.158 Ip
If I change to 0.0.0.0 it is the same thing... -
@erickindi what OS are you on?
Can you try and load the page using an incognito tab?
Can you also try adding the subnet mask and gateway?Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@jay_s_uk Im on Windows using chrome. But I am using my Duet Ethernet in my other printer with no problems.
-
@jay_s_uk Thank you so much for your help!!!
For some reason, when I conected to another router, it worked!!
