Solved [F407ZG] How to activate endstop power?
o_lampe last edited by o_lampe
how do I activate the row of endstops on the 407ZG? I had to tap 3.3V from another header to make my IR-beam brakers work.
As a sidenote: the endstops were named 'xstop' and 'ystop' from the STM-config tool, but there are 'xmin/xmax' headers...
P.S. Where can I find a better pin mapping chart? The picture on the 'pin names' page is almost unreadable...
jay_s_uk last edited by jay_s_uk
@o_lampe there is a header here
This enables 5v or VCC (12v or 24v) at the end stops.
Either name is accepted for each endstop input, e.d. xmax or xstopmax.
We standardised on xstop and xstopmax etc across boards so config's can easily be moved.
The image on the pins page is SVG and can be opened in a new tab to view it larger
o_lampe last edited by
@jay_s_uk Thanks Jay, I missed that info on the github pages...