Skipping grid point
Fishpig last edited by Fishpig
So i am trying to level the bed on the old Troodon now that the guys here have helped me sort the issues Vivendon put in their cura profile
anyway i get this from a G29
Send: G29 X400 Y400 Recv: Warning: Skipping grid point (15.0, 15.0) because Z probe cannot reach it
I have edited my config to define the bed mesh as 400, 400, 500 and the BLtouch mesh to 385 ,385.
Tell ya what, this reprap is a lot better but a big learning curve from marlin.
fcwilt last edited by
What are the X and Y offsets of your Z probe.
See the G31 command.
o_lampe last edited by o_lampe
G29 X400 Y400
That's not a valid command.
See here for using mesh compensation: https://duet3d.dozuki.com/Wiki/Using_mesh_bed_compensation