(Mostly) 3D printed Xmas Pyramid revisited
deckingman last edited by
Maybe we should have a "look what I made" section? In the absence of such a thing, I thought I'd post this here. If anyone is interested, I have replaced the previous fixed speed, fixed voltage, geared (noisy) motor with a stepper motor, driven by a TMC2208 driver module which has made it silent (at least to my ears). I've also replaced the LEDs with new, WS2812 addressable LEDs and use a Wemos D1 mini running ESP home to simulate a flickering candle effect. Finally, I have made a new drive shaft to replace the previous threaded rod. This is in sections for easier storage and along with redesigned rotating discs, allows tool free assemble.
A short YouTube link is here https://youtu.be/olKgEr6VtaM
weed2all last edited by
SIam last edited by
@deckingman looks great !!!
amjm22 last edited by