While printing Z axis is not going to the correct height
-
Hello!
I'm having problems with my machine.
When I print, if layer height is 0,6mm the printer goes to 0,23mm in first layer. I check it in Web Control Panel and I really don't know why is happening that.
On first tests I think it was working ok, and the only difference is that I use the mesh grid and now I load the mesh before printing (G29 S1)
Any ideas?
I
-
@duncan Check your slicer, you can set the first layer thickness. Unlesss you have the wrong steps per mm for Z.
-
@stephen6309 I've just discovered the problem.
In Simplify 3D I have in Gcode z offset in -1, so the Web panel starts in 0 but for gcode is really in -1, so first layer was 105% layer height of 0.6mm, thats 0,63mm, and second layer 0,6 more, thats 1,23mm, minus 1 because of the negative offset is the 0,23 that webpanel was showing me...
