Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    setting the temperature using 12864 mini

    Scheduled Pinned Locked Moved
    Beta Firmware
    5
    26
    1.2k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dc42undefined
      dc42 administrators @oliof
      last edited by

      @oliof @Vladimir_U please try RRF 3.4b7+6 which is now at https://www.dropbox.com/sh/i5vox3xmkd55gaz/AAC19mI0WEC5GmEjLOBRbKs-a?dl=0.

      Duet WiFi hardware designer and firmware engineer
      Please do not ask me for Duet support via PM or email, use the forum
      http://www.escher3d.com, https://miscsolutions.wordpress.com

      Vladimir_Uundefined 2 Replies Last reply Reply Quote 0
      • Vladimir_Uundefined
        Vladimir_U @dc42
        last edited by

        @dc42 Yes, the bed is fine now. But the heater of the tool head stopped working.
        Снимок экрана 2022-01-13 213559.png

        there was also a strange driver error
        Снимок экрана 2022-01-13 213419.png

        dc42undefined 1 Reply Last reply Reply Quote 0
        • Vladimir_Uundefined
          Vladimir_U @dc42
          last edited by Vladimir_U

          @dc42 I found two more bugs. It is possible to go into negative values in heating the bed and in adjusting the flow.

          photo_2022-01-13_21-53-45.jpg photo_2022-01-13_21-53-33.jpg
          Снимок экрана 2022-01-13 215756.png

          1 Reply Last reply Reply Quote 0
          • dc42undefined
            dc42 administrators @Vladimir_U
            last edited by

            @vladimir_u said in setting the temperature using 12864 mini:

            @dc42 Yes, the bed is fine now. But the heater of the tool head stopped working.

            When I looked at at the code I found that it was automatically selecting the tool whenever you tried to adjust the heater temperatures. This was a bad thing to do for two reasons:

            • It was not running the tool change files
            • On a multi-tool machine you might want to adjust the active temperature of a tool while another tool was printing

            So I removed that automatic tool selection. If you have a single-tool machine, you may wish to put a T0 command at the end of config.g.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            Vladimir_Uundefined 1 Reply Last reply Reply Quote 0
            • Vladimir_Uundefined
              Vladimir_U @dc42
              last edited by

              @dc42 Hello. When adding T0 to the config.g everything works well. But the problem with negative values and drivers is still relevant.

              dc42undefined 1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                I think the driver error message has been fixed in the latest updated beta 7+7

                Z-Bot CoreXY Build | Thingiverse Profile

                1 Reply Last reply Reply Quote 0
                • dc42undefined
                  dc42 administrators @Vladimir_U
                  last edited by

                  @vladimir_u said in setting the temperature using 12864 mini:

                  @dc42 Hello. When adding T0 to the config.g everything works well. But the problem with negative values and drivers is still relevant.

                  Do you think that is a new issue, or has it always been present? Is it a problem?

                  Duet WiFi hardware designer and firmware engineer
                  Please do not ask me for Duet support via PM or email, use the forum
                  http://www.escher3d.com, https://miscsolutions.wordpress.com

                  oliofundefined Vladimir_Uundefined 2 Replies Last reply Reply Quote 0
                  • oliofundefined
                    oliof @dc42
                    last edited by

                    @dc42 it's a new issue.

                    <>RatRig V-Minion Fly Super5Pro RRF<> V-Core 3.1 IDEX k*****r <> RatRig V-Minion SKR 2 Marlin<>

                    1 Reply Last reply Reply Quote 0
                    • Vladimir_Uundefined
                      Vladimir_U @dc42
                      last edited by

                      @dc42 I can say with confidence that the problem with negative temperatures was on the stable release 3.3

                      dc42undefined 1 Reply Last reply Reply Quote 0
                      • dc42undefined
                        dc42 administrators @Vladimir_U
                        last edited by

                        @vladimir_u said in setting the temperature using 12864 mini:

                        @dc42 I can say with confidence that the problem with negative temperatures was on the stable release 3.3

                        What exactly is the problem?

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        Vladimir_Uundefined 1 Reply Last reply Reply Quote 0
                        • Vladimir_Uundefined
                          Vladimir_U @dc42
                          last edited by

                          @dc42 I'm sorry, maybe I'm translating some phrases incorrectly. English is not my native language. For me, "problem" and "issue" are words with the same meaning. In my understanding, negative temperature and negative flow value cannot be in the physical sense. And the ability to set these parameters from the printer screen seems unreasonable. Whether this is a problem or a issue I can't say for sure. I would say it's a trouble.

                          1 Reply Last reply Reply Quote 0
                          • Phaedruxundefined
                            Phaedrux Moderator
                            last edited by

                            Does anything bad happen when you select a negative range?

                            Z-Bot CoreXY Build | Thingiverse Profile

                            Vladimir_Uundefined 1 Reply Last reply Reply Quote 0
                            • Vladimir_Uundefined
                              Vladimir_U @Phaedrux
                              last edited by

                              @phaedrux No, nothing bad is happening

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA