FYSETC 12864

Reefwarrior

M918 P2 C40 F2000000 E2 causes the 'cursor' to jump all over if I turn one click back or forward. If I turn another click; it isn't flashing anymore; but I'm not able to select most of the stuff on the screen....

Reefwarrior

Anybody?

oliof

Try E1 as a first step?

Reefwarrior

@oliof

Tried E1, E2, E3, E4, E10, E20. None of it works the way it is supposed to....

Reefwarrior

@oliof I will try a different screen and board this afternoon - luckily I do have spare.

oliof

@reefwarrior values of E1 to E4 (or E-1 to E-4) are expected and used. I have a FYSETC 12864 2.1 running on a Duet 3 mini 5+, with the following at the end of config.g

; enable display

M918 P2 E-4
G4 S1  ; pause
M918 P2 E-4
M150 X2 R255 U255 B255 S3 ; set all 3 LEDs to white

Reefwarrior

@oliof Hi, tried. Different screen and different board. Same result.....

Reefwarrior

@oliof said in FYSETC 12864:

@reefwarrior values of E1 to E4 (or E-1 to E-4) are expected and used. I have a FYSETC 12864 2.1 running on a Duet 3 mini 5+, with the following at the end of config.g
; enable display

M918 P2 E-4
G4 S1  ; pause
M918 P2 E-4
M150 X2 R255 U255 B255 S3 ; set all 3 LEDs to white

Also I get the M150 command not supported.

CONFIRM the FYSETC mini12864 V2.1 is supported on Duet2 Wifi?

jay_s_uk

@reefwarrior X2 is not a valid command for standard RRF and its only valid on the STM port of RRF. Use X1

Reefwarrior

@jay_s_uk Even die x1 causes it to complain about the command. Been an uphill battle to get this screen to work...

jay_s_uk

@reefwarrior which firmware version? I think neopixel support was only added to the duet 2 in recent beta builds

Reefwarrior

@jay_s_uk Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3beta2 (2021-03-10)

jay_s_uk

@reefwarrior yea, you need to update

Reefwarrior

@jay_s_uk cool. Any specific version? Or just the latest BETA?

jay_s_uk

@reefwarrior I would probably go 3.4b6 or 3.4b7+4 from here https://forum.duet3d.com/topic/26787/unofficial-rrf-3-4-0beta7-4-files/18

Reefwarrior

@jay_s_uk Cool thanx, downloading and will give it a try!

Reefwarrior

@jay_s_uk

jay_s_uk

@reefwarrior yep, you need the IAP from the 3.3 release. best to update to that first

Reefwarrior

@jay_s_uk cool

Reefwarrior

@jay_s_uk Thank you! Got it working 100% Can you perhaps mark this post as SOLVED?

Solved FYSETC 12864