Integrating closed loop stepper motors to a duet wifi and duex5
mhallett last edited by
I want to upgrade to closed loop stepper motors with external drivers and encoders. but not sure how to wire them up. anyone have a clue on how to do this or if it is even an option. My build is a corexy with 3 independent z motors. I was going to switch to something like these https://www.amazon.com/dp/B07235MBM6/ref=asc_df_B07235MBM65194322/?tag=hyprod-20&creative=395033&creativeASIN=B07235MBM6&linkCode=df0&hvadid=216516247812&hvpos=1o2&hvnetw=g&hvrand=14811364100777284957&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9005680&hvtargid=pla-359900856125
See "Using external drivers" on the wiki.