• Tags
  • Documentation
  • Order
  • Register
  • Login
Duet3D Logo Duet3D
  • Tags
  • Documentation
  • Order
  • Register
  • Login

Input Shaping Plugin fails

Scheduled Pinned Locked Moved
Duet Web Control
3
7
333
Loading More Posts
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • undefined
    dhusolo
    last edited by 21 Mar 2022, 19:10

    I've tried running input shaper plugin 0.2.0-pre9 on my Duet 3 MB6HC, RPI and Duet Toolboard v1.1 but the plugin never finishes.

    After a minute or 2 I get the following error
    becb426c-5ff2-45a9-93cc-3c0cff90c40d-image.png

    af28e0a9-684e-4f3d-a972-ff13f4e2bb0b-image.png

    undefined 1 Reply Last reply 21 Mar 2022, 19:51 Reply Quote 0
    • undefined
      jay_s_uk @dhusolo
      last edited by 21 Mar 2022, 19:51

      @dhusolo does the accelerometer work when using M956?

      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

      undefined 1 Reply Last reply 21 Mar 2022, 19:54 Reply Quote 0
      • undefined
        dhusolo @jay_s_uk
        last edited by 21 Mar 2022, 19:54

        @jay_s_uk Yes. I just ran this

        G1 X5 G4 S2 M956 P20.0 S1000 A0 G4 P10 G1 X125 F20000
        

        and the output was this
        8c17bef6-7bd6-41e6-bb03-14e02003e056-image.png

        undefined 1 Reply Last reply 21 Mar 2022, 20:44 Reply Quote 0
        • undefined
          dc42 administrators @dhusolo
          last edited by 21 Mar 2022, 20:44

          @dhusolo what firmware version are you using? The IS plugin requires some support that is only present in the later 3.4beta releases and RCs.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          undefined 1 Reply Last reply 21 Mar 2022, 20:45 Reply Quote 0
          • undefined
            dhusolo @dc42
            last edited by 21 Mar 2022, 20:45

            @dc42 DSF, RRF and DWC are all on 3.4

            undefined 1 Reply Last reply 21 Mar 2022, 21:20 Reply Quote 0
            • undefined
              dc42 administrators @dhusolo
              last edited by 21 Mar 2022, 21:20

              @dhusolo is the tool board also definitely running firmware 3.4.0?

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              undefined 1 Reply Last reply 21 Mar 2022, 21:21 Reply Quote 0
              • undefined
                dhusolo @dc42
                last edited by 21 Mar 2022, 21:21

                @dc42 Yes
                29b0c3c1-5bf1-4009-9726-d603ec4da891-image.png

                1 Reply Last reply Reply Quote 0
                1 out of 7
                • First post
                  1/7
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA