Corexy not printing at perfect right angle



  • Hiya,

    My prints in the stl file is straight whilst tangible prints are not, or atleast the angle is not straight, doesn't matter how i do the timing belt i.e. cross it over, straight across etc.

    Heres a picture of the scewed print


    please help

    I have now converted my corexy to using V slot Wheels



  • Too little information but if I understand the picture right you have huge layer shift problem. That might be caused by several things. I have battled quite a lot with the same issue, allthough less of it in the prints. BTW it is not because you have CoreXY setup, it's something else. Mechanical neither, most probably.

    What electronics do you have connected to the Duet?


Locked
 

Looks like your connection to Duet3D was lost, please wait while we try to reconnect.