Omerod 2 Jerky circular movement

  • Hello,

    Omerod 2
    Duet WiFi
    OSX: Yosemite
    Slice3r 1.2.9
    Firmware Version: 1.15b (2016-08-25)

    On previous boards circles have been perfect. I am currently experiencing slighty jerky printing on circles and am wondering what possible configuration commands I should be looking at to compensate for this.

    If anyone can point me in the right direction it would be appreciated.

    BTW: If this is the wrong place to post this please let me know for future reference.



  • administrators

    1. Please confirm that you are printing from SD card.

    2. Upgrade to latest firmware. A fix for high speed circles was implemented recently.

    3. If that doesn't help, try increasing XY jerk in the M566 command in config.g.

  • Many Thanks dc42…

    Updated the firmware to: 1.15e (2016-10-02) ( previously 1.15b)

    This sorted the jerky circular movement issue out on my Omerod 2.

Log in to reply