Who is coming to MRRF
-
Its less than a month away and I am really looking forward to meeting everyone who can make it!
Duet3d will have a table with a Jubilee printer (from Filastruder) brought by @Sindarius along with a very special guest!
-
We'll be there with several printers - all featuring Duet electronics of course!
-
For those who couldn't make it to MRRF, here are a few photos of our booth. We brought a 16x16x24" (410x410x610mm) dual tool and a 12x12x12" (310x310x310mm) single tool machine.
The smaller machine was printing all weekend. That's a 22lb (10kg) spool of ABS in the small chamber next to the enclosed printer. Black Cat printed in 9h 18m. Spider-Man printed in 9h 51m. They are both 12" (304.8mm) tall and were printed at 150mm/s (60mm/s external perimeter) with a .4m nozzle, .25mm layer height, and .8mm extrusion width. The chamber was held at 65c. Unfortunately, there is some light ringing on Black Cat as I forgot to stabilize the table until after it was complete.. whoops.
Photos taken under very harsh overhead lighting, btw.
Overall, it was a great experience and we were super glad to have the opportunity to show the world. Probably the most valuable takeaway from the show is that no one could read our logo. Doh! Everything thought it was "dozeBot" and now that's all I can see. So we'll definitely have an updated logo and replacement backdrops and tablecloths for the next show..
