Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Troubleshooting help with a Duet2

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    151
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Andy Cohenundefined
      Andy Cohen
      last edited by

      This is a Duetwifi2 with the extension board in an E3D Toolchanger. I just did a rebuild of a tool (a V6 with an orbiter feeder) powered up and all looked OK. I went to power the new heater and I hear a "tick" from the board and the panel due goes dead. No web access either. All the fans are working and the blue LED on the board is lit.

      So... what to test? Ideas? Did my Duetwifi just croak on me?

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        Power everything off. Inspect your wiring for shorts.

        Then follow this guide.

        https://docs.duet3d.com/en/User_manual/Troubleshooting/Duet_wont_respond

        Z-Bot CoreXY Build | Thingiverse Profile

        Andy Cohenundefined 1 Reply Last reply Reply Quote 0
        • Andy Cohenundefined
          Andy Cohen @Phaedrux
          last edited by

          @phaedrux Yup I blew the 7.5a fuse in the extension board. There has to be a short in the heater cables.

          1 Reply Last reply Reply Quote 1
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA