Extruder Bondtech LGX

jason0607

Hello!
Can someone please explain to me how to install and configure an extruder (Bondtech LGX) on a Duet3Mini 5+?

droftarts

@jason0607 See the guides on the documentation wiki.
For connecting an extruder to Duet (connecting the motor): https://docs.duet3d.com/en/How_to_guides/Wiring_your_Duet_3#h-14-stepper-motors
For firmware configuration of the extruder (defining extruder steps per mm and accerlerations): https://docs.duet3d.com/en/How_to_guides/Configuring_firmware#h-4-motors
For fine tuning steps per mm etc, see https://docs.duet3d.com/en/How_to_guides/Calibration

If you need specific help with some aspect of installing the extruder, please post your config.g and a bit more information about what the problem is.

Ian