Drag&Drop + single file upload not working for filaments

Exerqtor

Tried updating my filament configs just now, and like the header says i don't work to drag&drop or upload single files.

If i zip up the load.g, unload.g & config.g in a .zip and manually locate them thru the DWC upload interface i get the error "Upload Filament Configs
This ZIP does not contain any usable fiels".

EDIT:
Forgot to mention that i'm on DWC 3.4.2 @ chrome for PC.

Phaedrux

Has this worked successfully previously?

Exerqtor

@phaedrux
Tbh i have no idea since it's the first time editing the filament config outside DWC, but it SHOULD work? Shouldn't it? 🤣

Phaedrux

@chrishamm should it?

Exerqtor

@phaedrux Judging by the info prompt you get if you hover over the upload button i would surely say so?

chrishamm

@exerqtor @Phaedrux At present only the three default macro files load.g, config.g, and unload.g are officially supported. You can upload entire filament configs but only if you download the corresponding filament directories first as ZIP files. Those three files must reside in a subdirectory, else you will get the error message that you mentioned.

This will be changed in the future but I cannot give you an ETA yet.