Enclosed chamber temperature monitoring and exaust fan control

apak

I am setting up, a thermistor for a chamber temperature monitor, but would also like to control a exaust fan in case the chamber reaches a temp.

I was thinking just to config the termistor al Sensor 2, and enable the fan

; Fan2 = MotherBoard Cooling
;----MCU & DRIVERS sensors------
M308 S2 P"e1temp" Y"thermistor" T100000 B3950 C0 R4700 A"Chamber"	
M950 F2 C"fan2" Q500									
M106 P2 H2 L.3 B.5 X.6 T40:65 					; Set fan 2 PWR fan. Turns on when chamber temperature, hits 40C at 30% and get at 60% when the temperature reaches 65

Any thoughts?

Phaedrux

I think that seems reasonable.