Colour DWC Header by printer

[CNCModeller]

Hi All,
Is there any way to change the colours of the DWC background or the header to make it cleared which machine I'm looking at?

I'm now running 3 printers and a laser sometimes concurrently and TBH I've hit cancel on the wrong machine more than once!! When I was just running 2 machines I simply had one set to dark mode and one set to normal.

Any constructive thoughts would be much appreciated!!!

Many thanks
Barry M

[T3P3Tony]

@CNCModeller I have moved this here as it could be a nice setting to add to DWC configuration.

[MichaelKallner]

@CNCModeller
Hi, you can change the machine Name in config.g with the M550 P“machinename“

This Name ist shown in the Top of the DWC.

[CNCModeller]

@MichaelKallner said in Colour DWC Header by printer:

@CNCModeller
Hi, you can change the machine Name in config.g with the M550 P“machinename“

This Name ist shown in the Top of the DWC.

Thanks @MichaelKallner I am aware of that, and my machines are all named differently, but it doesn't really make much of a difference when you're skipping between several machines running concurrently, it's very easy to make a mistake.

[MintyTrebor]

@CNCModeller I noticed your post whilst I was in the middle of an update for BtnCmd, so I quickly added an option in the plugin's global settings to allow you to change the top bar color - hope this helps until an official solution arises.

[CNCModeller]

@MintyTrebor thanks that's great, I'll have a look next time I fire up the printers.

Much appreciated
Cheers
Barry M