Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    BLTouch and : Pin 'zprobe.in' is not free

    Scheduled Pinned Locked Moved Solved
    General Discussion
    bltouch zprobe.in duet 2 wifi
    2
    11
    369
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jay_s_ukundefined
      jay_s_uk @JADoglio
      last edited by

      @JADoglio do you have deployprobe.g and retractprobe.g in your sys folder?

      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

      JADoglioundefined 1 Reply Last reply Reply Quote 0
      • JADoglioundefined
        JADoglio @jay_s_uk
        last edited by JADoglio

        @jay_s_uk Good question. Yes and I should have included that. And using M98 they both work as expected. Thanks

        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @JADoglio
          last edited by

          @JADoglio what M98 are you using to call them?

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          JADoglioundefined 1 Reply Last reply Reply Quote 0
          • JADoglioundefined
            JADoglio @jay_s_uk
            last edited by

            @jay_s_uk M98 P"deployprobe.g" M98 P"retractprobe.g"

            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
            • jay_s_ukundefined
              jay_s_uk @JADoglio
              last edited by

              @JADoglio said in BLTouch and : Pin 'zprobe.in' is not free:

              M574 Z1 S1 P"^zprobe.in"

              oh, remove this line from your config.g

              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

              1 Reply Last reply Reply Quote 0
              • jay_s_ukundefined
                jay_s_uk @JADoglio
                last edited by

                @JADoglio that should allow M401 and M402 to work then as they appear to be in the correct place

                Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                JADoglioundefined 1 Reply Last reply Reply Quote 0
                • JADoglioundefined
                  JADoglio @jay_s_uk
                  last edited by

                  @jay_s_uk If I remove that what will define my Z endstop?

                  jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                  • jay_s_ukundefined
                    jay_s_uk @JADoglio
                    last edited by

                    @JADoglio you can't define a pin more than once for anything. you don't need any M574 line for Z to use a probe. none of my printers have a z endstop defined

                    Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                    JADoglioundefined 1 Reply Last reply Reply Quote 0
                    • JADoglioundefined
                      JADoglio @jay_s_uk
                      last edited by

                      @jay_s_uk OK thanks. I didn't realize that. I will give it a try. I am doing a PID Autotune on the bed right now as I just replaced that as well. Once it is done I will try your suggestion.

                      JADoglioundefined 1 Reply Last reply Reply Quote 1
                      • JADoglioundefined
                        JADoglio @JADoglio
                        last edited by

                        @JADoglio Thanks You very much. I don't care how many hours I spend printing, building printers, and upgrading there is always something new to learn and thankfully someone out there to teach it.

                        1 Reply Last reply Reply Quote 1
                        • Phaedruxundefined Phaedrux marked this topic as a question
                        • Phaedruxundefined Phaedrux has marked this topic as solved
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA