Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    What to add next?

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    4
    5
    766
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • coffman34undefined
      coffman34
      last edited by

      I have successfully built my D-bot with a Duet Wifi and DeuX5. I have 3 independent Z motors, BLTouch, LEDs around the top for lighting.

      Currently finishing up printing ABS parts to replace the PLA parts I initially built with on a DaVinci Mini. I have noticed a 200% quality increase with using the parts printed from my D-Bot than from that DaVinci.

      I like to tinker, and add stuff, even if it's not necessarily needed.

      What are some of your Duet additions to your printers?

      I'm thinking a filament sensor using an endstop.

      Looking for other ideas, as I have a ton of open ports and such on my Duet and would love to start getting into the fun parts of this board.

      One day, when I build an enclosure I'll add some fans for the enclosure, and a temperature sensor on it as well. But that's going to be a little while down the line.

      1 Reply Last reply Reply Quote 0
      • dc42undefined
        dc42 administrators
        last edited by

        IDEX perhaps?

        Duet WiFi hardware designer and firmware engineer
        Please do not ask me for Duet support via PM or email, use the forum
        http://www.escher3d.com, https://miscsolutions.wordpress.com

        1 Reply Last reply Reply Quote 0
        • deckingmanundefined
          deckingman
          last edited by

          3 or 5 colour mixing hot end (of you have a masochistic streak)? A few thermostatically controlled fans for cooling electronics or motors? RGB LEDs? Filament sensors?

          Ian
          https://somei3deas.wordpress.com/
          https://www.youtube.com/@deckingman

          1 Reply Last reply Reply Quote 0
          • adam2070undefined
            adam2070
            last edited by

            I am currently building a similar setup and working my configuration files at the moment. I am currently debating the following upgrades.

            • Dual Bowden Y-splitter setup for dual colour printing
            • LCD Display of some kind
            • Magnetic removable build platform.
            • Fillment sensors.
            1 Reply Last reply Reply Quote 0
            • coffman34undefined
              coffman34
              last edited by

              @dc42:

              IDEX perhaps?

              IDEX Sounds interesting and complicated. I like it!

              1 Reply Last reply Reply Quote 0
              • First post
                Last post
              Unless otherwise noted, all forum content is licensed under CC-BY-SA