Trouble connecting directly to Duet Ethernet via Desktop PC
-
Re: How to connect directly to Duet Ethernet with Ethernet Cable?
Hello all, I hate to revisit an old and boring topic, but I'm struggling mightily to connect directly to my Duet 2 Ethernet with an ethernet crossover cable going from the Duet right to the desktop.
I installed YAT and went through the various posted steps. I have the following settings at the moment:
Any help anyone might share would be greatly appreciated
I had used the Duet wifi successfully for years but moved the printer to a location where I can't connect to wifi directly, so I am trying to switch to the Duet ethernet. -
@tom_lauerman
I believe you’ll need to use a standard cable not a crossover,Hope is of help
-
Auto negotiation SHOULD work and a crossover cable is not needed. Have you tried yet with a normal cable?
-
@Phaedrux I have not, will try that, thanks
-
Also see here for a guide on wired direct connection: https://docs.duet3d.com/User_manual/Machine_configuration/Networking#wired-direct-connection
-
@Phaedrux Thanks again, I hadn't seen that guide before, will dig into this
-
@Phaedrux many thanks all, I was able to get this up and running by following the guidance provided here. Cheers!
-
undefined Phaedrux marked this topic as a question
-
undefined Phaedrux has marked this topic as solved
