Hide tool in PanelDue 7i
-
Hi.
I am building a IDEX 3d printer and in the config.g i create tool 0 for extruder 1, tool 1 for extruder 2 and tool 2 for copy mode.
The screen shows all the tools i create but i only want to show tools 0 and 1, for me tool 2 that is a reference for copy mode is not important in the screen.
Is possible to hide the copy mode tool??
Thanks -
No, it isn't possible. Always all tools are displayed.
Although i think there's a max number to display.
-
@CorvoConV in the current firmware version of the Paneldue there is a setting hide heaters.
so for me, at least in tool two, there is only one temperature in the display
