Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    MKS thr32/thr42 usb toolboards and duet2 wifi

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    217
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • manne_sahneundefined
      manne_sahne
      last edited by

      Are the mks thr32/thr42 usb toolboards in amy way compatible with a duet2 wifi running Klipper FW?

      jay_s_ukundefined 1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk @manne_sahne
        last edited by

        @manne_sahne connect them to klipper via a UTOC or similar

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        manne_sahneundefined 1 Reply Last reply Reply Quote 0
        • manne_sahneundefined
          manne_sahne @jay_s_uk
          last edited by

          On the github they write:

          USB communication

    Keep the usb connection is ok between the MKS THR36/42 and your Klipper host board, and power on.
    SSH login to your Klipper console and run

    ls /dev/serial/by-id/*

          If this should work, is it possible to use a USB Hub to connect the toolboard and the Raspberry Pi to the duet?

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA