-
Good morning,
I would like to know if the new S4:5:6:7 commands of the M291 can be used from PanelDue when the stable firmware 3.5 is released.
It would be very useful for me.
I look forward to your response.
Best regards,
Aitor -
undefined T3P3Tony moved this topic from Firmware developers
-
Good morning @dc42 an @T3P3Tony ,
Do you know if work is being done to implement the previously mentioned functions in PanelDue? I would like to know if they will be available when the firmware 3.5 is stable. At the moment, it can be confusing since these messages are displayed in both DuetWebControl and PanelDue, but the latter does not have the latest implementations. One possible solution would be to allow specifying where these messages should be displayed, similar to M118.
I look forward to your comments.
-
@Aitor there is some work being done on it. We aim to have it out in time for 3.5 but can't guarantee that at this point.
-
Thank you @T3P3Tony for your response, it's helpful to know that it will be implemented sooner or later.
