Help calibrating my delta printer.
-
So I reconverted an anycubic predator. With a duet maestro and a smart effector. But the printer refuses to Zero on the bed properly. It always either hits the bed or prints on air.
And now this erroe occurs
G28
Error: G0/G1: target position not reachable from current position. -
@abindarraez1 Please see the post here, which explains what information is useful to include in your post to help us to help you.
https://forum.duet3d.com/topic/5909/guide-for-posting-requests-for-helpIan
