Dwc , issues .

[Richard F]

my custom bed temps are not being applied to the dropdown , It's! been like this for some time .. So I'm not sure if I've done something to break it . Thanks

[oliof]

@Richard-F you need to activate a tool with T0 to enable manual retraction.

[Richard F]

This post is deleted!

[Richard F]

@Richard-F PS
"T0" worked Thank you

[oliof]

@Richard-F if your printer is a single toolhead one, you can add T0 at the end of your config.g

[Richard F]

@oliof thanks , it did that