Navigation

    Duet3D Logo

    Duet3D

    • Register
    • Login
    • Search
    • Categories
    • Tags
    • Documentation
    • Order

    DWC rr_status different than DWC UI percentage printed

    General Discussion
    3
    3
    413
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kazolar
      kazolar last edited by

      http://10.1.1.108/rr_status?type=3 reports a different fractionPrinted than the percentage shown in the DWC UI. Where do I get that percentage?

      1 Reply Last reply Reply Quote 0
      • totalitarian
        totalitarian last edited by

        I found the same issue.

        The one on the DWC UI seems to be based on filament printed. Not sure where the rr_status one get's it from….

        1 Reply Last reply Reply Quote 0
        • dc42
          dc42 administrators last edited by

          The fractionPrinted variable in the rr_status result is the fraction of the GCode file that has been processed. I presume that DWC is calculating the fraction of total filament consumed instead, based on the filament needed from the file info and the reported total extrusion.

          Duet WiFi hardware designer and firmware engineer
          Please do not ask me for Duet support via PM or email, use the forum
          http://www.escher3d.com, https://miscsolutions.wordpress.com

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA