Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 6HC + Raspberry Pi 4 Not Connecting

    Scheduled Pinned Locked Moved Solved
    General Discussion
    4
    21
    277
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • jay_s_ukundefined
      jay_s_uk @rkutun
      last edited by

      @remzirecep no, thats not normal.
      Is the status LED flashing roughly once per second? e59566ba-acf0-4557-87a3-8154986cfc22-image.png

      Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

      rkutunundefined 1 Reply Last reply Reply Quote 0
      • rkutunundefined
        rkutun @jay_s_uk
        last edited by

        @jay_s_uk The status LED is dimly lit.

        photo.jpg

        jay_s_ukundefined 1 Reply Last reply Reply Quote 0
        • jay_s_ukundefined
          jay_s_uk @rkutun
          last edited by

          @remzirecep then theres no firmware on the 6HC
          follow these instructions https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware#all-other-duet-boards

          Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

          rkutunundefined 1 Reply Last reply Reply Quote 0
          • rkutunundefined
            rkutun @jay_s_uk
            last edited by

            @jay_s_uk After applying the steps here, is the LED supposed to turn off? When I follow the steps and then plug in the Ethernet cable, my computer doesn’t detect the board’s port. Can you help me with this?

            jay_s_ukundefined 1 Reply Last reply Reply Quote 0
            • jay_s_ukundefined
              jay_s_uk @rkutun
              last edited by

              @remzirecep the LED is supposed to flash about once every second. What is it doing now?

              Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

              rkutunundefined 1 Reply Last reply Reply Quote 0
              • rkutunundefined
                rkutun @jay_s_uk
                last edited by

                @jay_s_uk It stays dimly lit all the time.

                jay_s_ukundefined 1 Reply Last reply Reply Quote 0
                • jay_s_ukundefined
                  jay_s_uk @rkutun
                  last edited by

                  @remzirecep then you haven't flashed the firmware to the board correctly

                  Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

                  rkutunundefined 1 Reply Last reply Reply Quote 0
                  • rkutunundefined
                    rkutun @jay_s_uk
                    last edited by

                    @jay_s_uk I downloaded the Duet3Firmware_MB6HC.bin file from the "3.5.3 Release Candidate 1" section on this link: https://github.com/Duet3D/RepRapFirmware/releases. Then, I shorted the "erase" jumper on the board. After waiting for a few seconds, I removed the jumper and pressed the reset button. I used "Bossa" to flash the firmware I downloaded from the link mentioned above. After flashing, I clicked "Verify" and it was successful, but the LED is still constantly lit. What should I do next? If what I’ve done is not correct, what is the correct process? Is there anything I’ve missed or something I haven’t done?

                    droftartsundefined 1 Reply Last reply Reply Quote 0
                    • droftartsundefined
                      droftarts administrators @rkutun
                      last edited by

                      @remzirecep said in Duet 3 6HC + Raspberry Pi 4 Not Connecting:

                      I used "Bossa" to flash the firmware I downloaded from the link mentioned above. After flashing, I clicked "Verify" and it was successful, but the LED is still constantly lit. What should I do next? If what I’ve done is not correct, what is the correct process? Is there anything I’ve missed or something I haven’t done?

                      See my answer here: https://forum.duet3d.com/post/344927

                      Specifically, you need to check boxes "Erase all", "Lock", and "Boot to flash" in Bossa, before clicking "Write".

                      Ian

                      TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi

                      rkutunundefined 1 Reply Last reply Reply Quote 0
                      • rkutunundefined
                        rkutun @droftarts
                        last edited by

                        @droftarts I solved my issue, thank you.

                        1 Reply Last reply Reply Quote 0
                        • chrishammundefined chrishamm marked this topic as a question
                        • chrishammundefined chrishamm has marked this topic as solved
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA