Homeing issue

[tecno]

Error: Failed to home axes ZACD

So on my Pick'n'Place I just want to home X/Y and ZACD set as homed, how to do this?

Are homez -a-c-d . needed if so what content.

[tecno]

G92 obviously

[droftarts]

@tecno Put G92 Z0 A0 C0 D0 at the end of your homeall.g. You can create individual homez.g, homea.g, homec.g and homed.g if you prefer, with just G92 [axis]0 in them.

Ian