Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Setup for a small milling machine

    Scheduled Pinned Locked Moved
    CNC
    2
    2
    49
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • mendeleviumundefined
      mendelevium
      last edited by

      I have successfully produced a large 3d printer with ballscrews with a duet wifi board.

      I do have an additional one and I am thinking of converting a micro milling machine (X-100mm Y-50mm and Z 100mm- with a spare board I have. Have anybody done this and anybody can put some links here for me to follow? I am an experienced CNC machinist and built a lot of equipment in my life so it should be easy if it is doable...
      Thanks for any help.

      droftartsundefined 1 Reply Last reply Reply Quote 0
      • droftartsundefined
        droftarts administrators @mendelevium
        last edited by

        @mendelevium Duet boards and RepRapFirmware support CNC machines. There is a CNC section of the forum (which I've moved this thread to) and a page for setting up CNC machines on the wiki, see https://docs.duet3d.com/User_manual/Machine_configuration/Configuration_CNC

        Ian

        TronXY X5S with Duet 3 MB6HC and Roto toolboard : Cartesian bed-slinger with Duet 3 Mini 5+ WiFi and 1LC : RRP Fisher Delta v1 with Duet 2 Maestro : Polargraph with Duet 2 WiFi

        1 Reply Last reply Reply Quote 0
        • droftartsundefined droftarts moved this topic from Duet Hardware and wiring
        • First post
          Last post
        Unless otherwise noted, all forum content is licensed under CC-BY-SA