Progress Bar Missing in RRF 3.6.0rc2 with PanelDue 3.5.1
-
Hey,
After recently updating RepRapFirmware (RRF) to version 3.6.0rc2 and the PanelDue firmware to version 3.5.1, I noticed that the progress bar does not display when printing or simulating G-code. Everything else appears to function normally, but the progress indicator is missing.
Could you please advise if this is a known issue or if there’s a configuration step I may have missed?
@dc42 @Phaedrux -
@R006 thanks for pointing this out. It's a bug in 3.6.0-rc.2 and -rc.3. It will be fixed in 3.6.0 stable.
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42
Okay, when was it released? -
@R006 it hasn't been released yet, however I will probably do a temporary build later today.
-
@R006 there are temporary firmware builds that include this fix at https://www.dropbox.com/scl/fo/xk6t4cibc602j0s3qmp48/AGouwT4mDySsLdBItGjDUcM?rlkey=k8j1rrfx18ixoyvizvs0hbehz&dl=0.
