Laser questions

gnatman

There is a wiki page giving connector and spare part numbers.

Thank you, I didn't even think to check the wiki for something like that. while I wait for the mail. I'm using another header.

I wonder if I could use a different header all around. Do you have any suggestions? I've seen talk about using the extruder… I think it was.

gnatman

Got the MOSFET installed, I now have fan control again… it looks a little rough but it works.. Gah those things are small.
anyway, still have an issue with the fan not turning off when 12v psu connected to 12vin on module and ttl connected to fan header. If I don't use the TTL it works via fan to pulse the laser on and off.